Shotgun Archives - Tier 1 Tactics

M-LOK® QD Sling Mount

Greg Webster — Thu, 26 Aug 2021 08:34:42 +0000

Our M-lok® sling mount for QD Swivels attaches flawlessly to any Magpul M-lok ® compatible slots.

Provides a rugged, low profile, snag-proof, ultra lightweight and ergonomic attachment point for your sling with a QD sling swivel.
Sling swivel rotation is limited to allow proper positioning of the sling as the weapon is transitioned between the firing and carrying position, preventing sling wrap-ip and twist.
Accepts all push button quick detach sling swivels.
Attaches to Magpul M-lok® compliant slots.
No gunsmithing and simple installation without removing the handguard.
Ultra-light design weighs only 0.314 ounces.
CNC machined from 6061-T6 aluminum; Type III Mil-Spec anodized.
Lifetime warranty
Made by an M-lok® licensee for Ferro Concepts.
Made in the USA

The post M-LOK® QD Sling Mount appeared first on Tier 1 Tactics.

IWC 2 TO 1 Point Triglide

Greg Webster — Thu, 26 Aug 2021 08:29:35 +0000

The Impact Weapons Components 2 To 1 Point Triglide can replace the rear plastic Triglide on the Slingster to rapidly convert to a One Point Sling. Works with either the QD Swivels or Steel Sling Hook 1″ . When extra maneuverability is required quickly switch to single point, then back to a two point for extra stability or when carrying the weapon. The 2 To 1 Point Triglide allows you to leverage the best of both sling types.

CNC machined from Billet 6061-T6 aluminum. Hard anodized Type III per MIL-A-8625F
US Patents D685445, D7171391
Made in the USA
Berry Compliant

The post IWC 2 TO 1 Point Triglide appeared first on Tier 1 Tactics.

D Loop Heavy Duty Push Button QD Swivel 1″

Greg Webster — Thu, 26 Aug 2021 08:18:21 +0000

The perfect addition to your Slingster or any sling with 1″ webbing. The release button on the swivel comes flush to the swivel body, virtually eliminating the chance for errant release of the swivel. Allows use of MASH or HK style CLASH hooks in push button base. Pull tested up to 450 pounds of pressure.

Non-Reflective Manganese Phosphate Finish.
Sold individually.
Made in the USA
Berry Compliant

The post D Loop Heavy Duty Push Button QD Swivel 1″ appeared first on Tier 1 Tactics.

Ferro Concepts Slingster®

Greg Webster — Thu, 26 Aug 2021 08:06:37 +0000

The Slingster® was developed to be the most modular rifle sling on the market. Its rapid adjust rubberized pull tab allows the ability to quickly transition your weapon from securely slung to combat ready.
Updated with the new Ferro Concepts Slingster® Pull Tab which improves upon the previously used ITW Zipline Orbit pull tab. The no-hole design and enhanced ribbed grip offers greater traction with or without gloves. Injection molded from high quality flexible rubber that maintains a ready position for quick adjustment of your Slingster®. Mounted securely with a black stainless-steel fastener.

Features:

Can be utilized in one point or two point

configurations using the correct hardware
Adjustable pad to maximize comfort
Removable pad allowing the use of a plain Slingster®
Open ended design gives user the choice of mounting hardware. (Hardware not included)
Custom injection molded Slingster Pull Tab
Custom welded steel common loop
Made in the USA
Berry Compliant / Trade Act Compliant

The post Ferro Concepts Slingster® appeared first on Tier 1 Tactics.

WILSON COMBAT®/BCM GUNFIGHTER, AR15/ AR10 PISTOL GRIP, STARBURST

Greg Webster — Thu, 26 Aug 2021 06:53:58 +0000

The Wilson Combat®-Bravo Company Starburst Gunfighter Grip is one of the more comfortable and ergonomic grips available for the AR15. Easy installed with a large flat head screwdriver, this high quality grip has become one of the leaders in the AR15 market in a very short time.

This nearly unbreakable polymer construction has a comfortable, natural grip angle for dynamic shooting and molded Wilson Combat exclusive Starburst design pattern for a sure grip. A water-resistant storage area is perfect for keeping lube or batteries.

The BCM Gunfighter Grip (GFG) features:
Reduced angle for improved ergonomics.
Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
Made in the USA and manufactured from high quality impact resistant polymers.
Mod-3 has rear tang filler for a larger grip to fit gloved and non-gloved users.
Exclusive Wilson Combat® Starburst pattern for a signature look and improved traction.

Note: The tab on the front of the grip must be removed for use with the Wilson Combat® Tactical Trigger Guard (TTG)

The post WILSON COMBAT®/BCM GUNFIGHTER, AR15/ AR10 PISTOL GRIP, STARBURST appeared first on Tier 1 Tactics.

Light Mount

Greg Webster — Thu, 05 Nov 2020 09:48:37 +0000

RLM- The Recessed Light Mount is a low profile and simplest way to add a Scout patterned weapon light to your MLOK rail. The RLM reverse mounts to MLOK rails by inserting two screws through the plate, through the rail, and into the weapon light. The RLM has two recoil lugs that protrude through the rail and index the weapon light. This mounting solution provides simple and minimalist profile. Mount and screws weigh 0.2oz. Includes long arm hex key to reach through rail during installation. *Usually requires hand guard removal for proper install. Depending on rail size Specs 6061 Aluminum 0.2oz with mounting screws Type 03 Hardcoat Ano Orbital Grey Finish Includes long arm hex wrench and mounting screws Fits Surefire® Scout lights with the shorter mounting posts.

The post Light Mount appeared first on Tier 1 Tactics.

QDX™ Sling Mount

Greg Webster — Thu, 05 Nov 2020 09:40:33 +0000

QDX MLOK Sling Mount – Our versatile take on the standard QD sling mount. Made out of 7075-T6 Aluminum with a Type 03 Hardcoat Anodizing, weighing in at a scant 0.3oz to help minimize overall weight. By rotating the mount to allow for parallel QD insertion, we effectively reduced the QD socket footprint (with sling attached) by 16% and the sling eyelet “height” off the rail by 37%. Additionally, it also allows for use with most HK-style hook attachments to provide our end users with a variety of options. The forward side can even be used to brace against vertical barriers to provide a more stable shooting position.

Ships Free and Made in USA

7075-T6 Aluminum
0.3 oz w/ hardware
Type 03 Hardcoat Anodizing
1 MLOK slot

The post QDX™ Sling Mount appeared first on Tier 1 Tactics.

Karve-P®

Greg Webster — Thu, 05 Nov 2020 09:28:04 +0000

Karve-P® – Polymer version of our popular Karve® machined handstop offers the same function and versatility at a fraction of the cost. Made out of the same heat-stabilized nylon as our HTP® Scales, the Karve-P® is also available in four popular colors for matching most color schemes. Available in KeyMod or MLOK variants, so make sure to choose the correct mounting style when placing your order.

Made in USA

2 KeyMod Holes or 1 MLOK Slot
Weight: 0.3 oz w/ hardware
Length: 1.5 Inches
Width: 0.625 Inches
High Temp Polymer

The post Karve-P® appeared first on Tier 1 Tactics.

Karve®

Greg Webster — Thu, 05 Nov 2020 09:27:22 +0000

Karve® – Offering a wide range of functionality, our patented Karve® Bi-Directional Stop is our most popular forward hand control product. Machined out of 6061 Billet aluminum, and available in 3 popular colors finished with a Type 03 Hardcoat Anodizing, the Karve® is a compact and ultralight solution for multiple shooting styles. Using our COG Multi-Mount, it is compatible with both KeyMod and MLOK rail systems, in addition to being reversible to accommodate a “push” or “pull” style grip, while only taking up 1 MLOK slot or 2 KeyMod holes to fit inside the cutout of our XOS-H, makes the Karve one of the most versatile solutions on the market.

Made in USA

2 KeyMod Holes or 1 M-LOK Slot
Weight: 0.4 oz each w/ hardware
Length: 1.5 Inches
Width: 0.625 Inches
6061 Billet Aluminum
Includes M-Lok & KeyMod Hardware
Utilizes our COG Multi-Mount
Type 03 Hardcoat Anodizing

The post Karve® appeared first on Tier 1 Tactics.

HTP® Scales in KeyMod

Greg Webster — Thu, 05 Nov 2020 08:48:28 +0000

HTP® KeyMod RailScales® – An alternative to our G10 line of machined RailScales®, the HTP® Scales are available with our same patented textures and hardware in an affordable heat-stabilized nylon. The injection molded High Temp Polymer scales come in 4 popular industry colors: Black, Flat Dark Earth, Sniper Grey and OD Green. They are available in 3 and 4 pack quantities to allow for a variety of setups on your rail, and coming in at only 0.010” thicker than our G10 line you will be able to outfit your firearm with added texture, grip and heat protection at a reduced cost.

Made in USA

5 KeyMod Holes
Width: 0.625
Thickness: 0.135″
Length: 3.94
Weight: 0.3 oz each w/ hardware
416 Stainless Nuts

The post HTP® Scales in KeyMod appeared first on Tier 1 Tactics.