The robust performance of the LINK System interface provides near-zero-loss output and dependable, repeatable activation. The lateral and reversible interface on the GASCAP provides a variety of mounting and cable management options, while its cage protects the cable and ensures a solid lockup. GASCAP features an onboard full-size latching button for momentary or constant activation of your device. Made of high-impact polymer, GASCAP is durable in even the most austere environments.

Currently available for SureFire® Scout®-style weapon lights, GASCAP pairs with UNITY’s AXON, AXON SL and ModButton Lite switch portfolios.

Description

The post Unity Tactical – GASCAP™ appeared first on Tier 1 Development Group.

Overview

The HWS EXPS3 is an excellent choice for professionals. The EXPS3 offers true two eyes open shooting for fast target acquisition, night vision compatible settings, and a 7mm raised quick detach base for lower 1/3 iron sight co-witness.

---

Included in the box:

• HWS EXPS3
• Quick-Start Guide
• Warranty Card
• CR123 Battery

Night Vision Compatible

L X W X H

---

3.8″ x 2.3″ x 2.9″ (96.5 x 58.4 x 73.7 mm)

Weight

---

11.2oz (317.5g)

Water Resistant

---

33ft. (10 m) depth

Mount

---

1″ Weaver or MIL-STD-1913 rail

Windage & Elevation Adjustment

---

0.5 MOA per click

Brightness

---

20 daylight settings
10 additional settings for Gen I through III+ night vision devices

Power Source

---

1 x CR123 battery

Battery Life

---

1,000 continuous hours at nominal setting 12 at room temperature

Operating Temperature

---

-40°F to 140°F (-40°C to 60°C)

Country of Origin

---

Made in USA

HWS EXPS3 Performance Characteristics

---

Operator Grade Holographic Weapon Sight

An operator-grade Holographic Weapon Sight built for close-quarter engagements with fast-moving targets.

---

---

---

Reticle Options

EOTECH’s unique reticle patterns are a critical to delivering fast target acquisition and MOA accuracy at any range. EOTECH reticles feature a 68 MOA ring surrounding a 1 MOA center dot allowing the shooter to quickly pick up and lock on a target.

EOTECH One Dot Reticle

Our most popular reticle offered, the 68 MOA ring with 1 MOA dot provides three usable aiming points. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. When using other loads and calibers, the operator will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns but will vary based on choke and shell selection. For ordering this reticle, the model codes will end in -0.

EOTECH Two Dot Reticle

Our two-dot reticle pattern can be easily distin- guished with or without magnification and offers the benefit of an additional long-range, aiming dot. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. For ordering this reticle, the model codes will end in -2.

EOTECH Four Dot Reticle

Use this ballistic reticle with 5.56 Nato/.223 cal with 62 gr M855 FMJ at roughly 2,680 fps with a 14.5″ barrel. For ordering this reticle, the model codes will end in -4. Aiming dots on the 4-dot reticle may not be distinguishable without magnification.

---

---

---

Range Estimation with Unmagnified HWS

The standard ring found in most reticles equates to approximately 68″ (5’8″) at 100 yards.

---

---

---

Brightness Options

The EXPS3 HWS offers multiple brightness settings with both Standard and Night Vision modes offering quick adjustability to accommodate any shooting situation.

Dark

Bright

---

---

---

Restrictions& Considerations

Before Making A Purchase:

Please note that ALL SALES OF SIGHTS ARE FINAL. No returns or exchanges on sights will be accepted. If purchased item arrives damaged or defective, please contact EOTECH Technical Support to obtain a RMA number.

Export Restrictions:

Export of this product is strictly controlled and enforced by the U.S. Department of Commerce, Bureau of Industry and Security, as prescribed in the Export Administration Regulation (EAR), Title 15, Code of Federal Regulations, Parts 730-774. EOTECH, LLC does not authorize any of its dealers or distributors to export this commodity without prior, written authorization, and will not provide warranty or post-sales support of unauthorized international exports.

Prop 65 Warnings:

This product can expose you to chemicals including (Epichlorohydrin, Phenyl, Hydrazine or Cumene) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

---

The post EoTech EXPS3-1 Holographic Weapon Sight appeared first on Tier 1 Development Group.

Overview

The HWS XPS2 is the non night-vision version of our shortest and lightest HWS sight so far. The CR123 lithium battery configuration of the XPS2 provides additional rail space, leaving more room for rear iron sights or magnifiers. Also offering water-resistant capability up to 10 feet, the XPS2 is a great compact and lightweight option for your platform.

---

Included in the box:

• HWS XPS2
• Quick-Start Guide
• Warranty Card
• CR123 Battery

Non-Night Vision Compatible

L X W X H

---

3.8″ x 2.1″ x 2.5″ (96.5 x 53.3 x 63.5 mm)

Weight

---

9.0 oz (255 g)

Water Resistant

---

10ft. (3 m) depth

Mount

---

1″ Weaver or MIL-STD-1913 rail

Windage & Elevation Adjustment

---

0.5 MOA per click

Brightness

---

20 daylight settings

Power Source

---

1 x CR123 battery

Battery Life

---

1,000 continuous hours at nominal setting 12 at room temperature

Operating Temperature

---

-40°F to 140°F (-40°C to 60°C)

Country of Origin

---

Made in USA

Reticle Options

EOTECH’s unique reticle patterns are a critical to delivering fast target acquisition and MOA accuracy at any range. EOTECH reticles feature a 68 MOA ring surrounding a 1 MOA center dot allowing the shooter to quickly pick up and lock on a target.

EOTECH One Dot Reticle

Our most popular reticle offered, the 68 MOA ring with 1 MOA dot provides three usable aiming points. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. When using other loads and calibers, the operator will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns but will vary based on choke and shell selection. For ordering this reticle, the model codes will end in -0.

EOTECH Two Dot Reticle

Our two-dot reticle pattern can be easily distinguished with or without magnification and offers the benefit of an additional long-range, aiming dot. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel. For ordering this reticle, the model codes will end in -2.

EOTECH 1-MOA Dot Only Reticle

 Single 1-MOA dot reticle that can be zeroed at any distance.

---

---

---

Range Estimation with Unmagnified HWS

The standard ring found in most reticles equates to approximately 68″ (5’8″) at 100 yards.

---

---

---

Brightness Options

The XPS2 HWS offers multiple brightness settings offering quick adjustability to accommodate any shooting situation.

Dark

Bright

---

---

---

Restrictions& Considerations

Before Making A Purchase:

Please note that ALL SALES OF SIGHTS ARE FINAL. No returns or exchanges on sights will be accepted. If purchased item arrives damaged or defective, please contact EOTECH Technical Support to obtain a RMA number.

Export Restrictions:

Export of this product is strictly controlled and enforced by the U.S. Department of Commerce, Bureau of Industry and Security, as prescribed in the Export Administration Regulation (EAR), Title 15, Code of Federal Regulations, Parts 730-774. EOTECH, LLC does not authorize any of its dealers or distributors to export this commodity without prior, written authorization, and will not provide warranty or post-sales support of unauthorized international exports.

Prop 65 Warnings:

This product can expose you to chemicals including (Epichlorohydrin, Phenyl, Hydrazine or Cumene) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

---

The post EoTech XPS2 Holographic Weapon Sight appeared first on Tier 1 Development Group.

SPECS

• Weight: 2.20 oz
• Length: 2.73 in
• Width: 1.26 in
• Height: 4.84 in

The post B5 – P-GRIP 23 appeared first on Tier 1 Development Group.

The plug is compatible with PEQ15, DBAL, BE Meyers® MAWL and Wilcox® RAIDx lasers ONLY. 

The package includes the switch PIC mounting rail and mounting hardware only. Additionally an adapter is also available for MLOK rails here.

Note: For most setups the 4.5in variant is enough cable to reach the device from the top rail.

Install torque for rail grabber bolts is 5 Inch-lbs

Made in the USA

Weight: 1.8oz
Dimensions: 1.0 × 3.8 × 5.7 in
Mounting Side: Left or Right
Color: Black and FDE

The post Modlite – ModButton™ Lite (Laser Plug) appeared first on Tier 1 Development Group.

The laser plug is compatible with PEQ15, DBAL, BE Meyers® MAWL and Wilcox® RAIDx lasers ONLY. 

The Dual Lead variant is our same Modbutton Lite, but has both a Surefire®/Modlite and Crane Laser lead. This Modbutton Lite activates both leads simultaneously, allowing for an excellent vis override functionality of both white light and visible laser. There is no way to select a single lead for activation. For that, we recommend the Unity TAPS SNYC. Available here.

ModButton Lite utilizes a patented Unity Tactical design which supports power delivery needed by the next generation of high output weapon lights like Modlite. A Unity-built Surefire®compatible cable lead allows ModButton Lite to be backwardly compatible with all Surefire®, Arisaka, and Modlite Scout bodies as well as Surefire UE and DS00 tail caps. If constant on is a requirement we recommend using a SF DS00 tail cap which can be found here.

One problem that exists today is older legacy switches are not able to pass the current needed to run current and future generation lights. These older switch designs do not allow Modlite light heads to run at full power. Typically these switches reduce output by 15-20%. ModButton Lite utilizes an updated plug design as well as improved electronics that allow the ModButton Lite to output at full power so all the lumens and candela can be put to good use.

The package includes the switch PIC mounting rails and mounting hardware only no tail cap is supplied. We recommend the Surefire UE or DS00 tailcap which can be found here. Additionally, an adapter is also available for MLOK rails here.

Note: For most setups the 4.5in variant is enough cable to reach the device from the top rail.

Install torque for rail grabber bolts is 5 Inch-lbs

Made in the USA

Weight: 1.8oz
Dimensions: 1.0 × 3.8 × 5.7 in
Mounting Side: Left or Right
Color: Black or Tan

The post Modlite – ModButton™ Lite (Dual Lead) appeared first on Tier 1 Development Group.

ModButton Lite utilizes a patented Unity Tactical design which supports power delivery needed by the next generation of high output weapon lights like Modlite. A Unity built Surefire®compatible cable lead allows ModButton Lite to be backwardly compatible with all Surefire®, Arisaka and Modlite Scout bodies as well as Surefire UE and DS00 tail caps. If constant on is a requirement we recommend using a SF DS00 tail cap which can be found here.

One problem that exists today is older legacy switches are not able to pass the current needed to run current and future generation lights. These older switch designs do not allow Modlite light heads to run at full power. Typically these switches reduce output by 15-20%. ModButton Lite utilizes an updated plug design as well as improved electronics that allow the ModButton Lite to output at full power so all the lumens and candela can be put to good use.

The package includes the switch PIC mounting rails and mounting hardware only no tail cap is supplied. We recommend the Surefire UE or DS00 tailcap which can be found here. Additionally an adapter is also available for MLOK rails here.

Note: For most setups the 4.5in variant is enough cable to reach the device from the top rail.

Install torque for rail grabber bolts is 5 Inch-lbs

Made in the USA

Weight: 1.8oz
Dimensions: 1.0 × 3.8 × 5.7 in
Mounting Side: Left or Right
Color: Black or Tan

The post Modlite – ModButton™ Lite (Surefire/Modlite Plug) appeared first on Tier 1 Development Group.

This MBL Dual lead is only compatible with crane laser plugs and UNITY TACTICAL  GASCAP TAILCAP.

Install torque for rail grabber bolts is 5 Inch-lbs

Made in the USA

Weight: 1.8oz
Dimensions: 1.0 × 3.8 × 5.7 in
Mounting Side: Left or Right
Color: Black or Tan

The post Modlite – ModButton™ Lite Dual lead LINK appeared first on Tier 1 Development Group.

The ModButton Lite is a smaller, lighter cousin to the original ModButton. The switch features the same momentary only activation as the original ModButton. It also features the same high-power cable and switch from ModButton, but in a slightly smaller package without the integrated mount.

Install torque for rail grabber bolts is 5 Inch-lbs

Made in the USA

Weight: 1.8oz
Dimensions: 1.0 × 3.8 × 5.7 in
Mounting Side: Left or Right
Color: Black or Tan

The post Modlite ModButton™ Lite LINK appeared first on Tier 1 Development Group.

Compatible accessories:
2 Pack 21700 Batteries
Thyrm Cellvault 21 Battery storage

Features:

The post Modlite – Modlite HOG Rifle Light Packages appeared first on Tier 1 Development Group.